Technical guide · Updated 2026-11-11
IP65 vs IP68 for Hazardous-Area Weighing Equipment
What the two IP ratings mean in practice for explosion-proof balances, and how to choose between splash resistance and continuous immersion protection.
This guide applies to Definition Electric Ex balance, weighing module and checkweigher installations. Certificate numbers, protection markings, IP ratings and interface details are stated explicitly so they can be verified against the delivered nameplate.
The rating has two independent digits
The first digit rates protection against solid objects and dust (6 = dust-tight, the highest level). The second digit rates protection against water. Both the EX-GB-H (IP65) and the EX-GB-T (IP68) are dust-tight; the difference is in the water test.
IP65 - low-pressure water jets
IP65 means the enclosure is protected against low-pressure water jets from any direction. In a plant it withstands splash, spillage and humid process areas. The EX-GB-H and EX-GB-G families are sealed to IP65.
IP68 - continuous immersion
IP68 means the enclosure is protected against continuous immersion under conditions agreed with the manufacturer. It is the rating to specify for washdown zones, wet process areas and frequent cleaning. The EX-GB-T precision balance and the EX-GT / EX-TCS indicator are sealed to IP68.
IP rating is not Ex certification
A sealed enclosure keeps water out; a flameproof enclosure keeps an ignition in. The two properties are independent and both are needed for a hazardous-area washdown application. Never buy on IP rating alone.
A quick selection guide
Dry dispensing booth, analytical work: IP65 is sufficient. Wet batching, washdown, outdoor or condensing areas: specify IP68. Where solvents or aggressive chemicals are present, add SUS304 or SUS316 stainless-steel construction.
Questions engineers ask
Can I hose down an IP65 balance?
IP65 is tested against low-pressure water jets, not high-pressure washdown or immersion. For regular hosing, specify IP68.
Does IP68 make a balance explosion-proof?
No. Ingress protection and explosion protection are separate certifications.
Specifications are typical and subject to change. Always verify the approval marking and certificate against your hazardous-area classification before installation.