Answers for specifiers

Frequently Asked Questions About Explosion-Proof Weighing

Direct answers on certifications, zones, readability, interfaces, battery charging and checkweighers.

What is an explosion-proof electronic balance?

A precision balance whose electrical circuits are enclosed in a flameproof housing so it can be operated in an area where flammable gases, vapours or combustible dust make an ordinary electronic balance unsafe. Definition Electric Ex balances carry the marking Ex db IIB T6 Gb.

Which hazardous zones can your balances be used in?

Our Ex db IIB T6 Gb enclosures are rated for Zone 1 and Zone 2 gas atmospheres. Always confirm the nameplate marking and certificate against your own area classification before installation.

Are your products ATEX or IECEx certified?

No. Our balances carry Chinese Ex certificates (ZJEx23.1422 for EX-GB families, SHExC22.2400 for the EX-MQ module) with enclosures designed to IEC 60079-0 and IEC 60079-1. We do not claim ATEX or IECEx certification.

What is the finest readability you offer?

0.0001 g (0.1 mg) on the EX-GB-H electromagnetic force balance, and 0.01 mg on the EX-MQ explosion-proof weighing module.

What is the largest Ex balance capacity?

320 kg with 1 g readability on the EX-GB-G large-display ground balance.

Do I need a purge or pressurisation system?

No. A flameproof (Ex db) enclosure contains an internal ignition by design, so no purge equipment is required.

Can weight data be sent to a PLC, printer or MES?

Yes. Ex balances provide RS-232 ASCII output; the EX-MQ module and CW checkweigher provide RS-485 / Modbus RTU; the EX-GT / EX-TCS indicator offers up to four relay outputs and optional RS-232C.

Can flameproof batteries be charged in the hazardous area?

No. The charger is not explosion-proof designed. Always charge the battery in a safe, non-hazardous area.

Is the CW automatic checkweigher explosion-proof?

The standard CW machine is designed for ordinary packing lines and carries no Ex approval. Contact our engineering team if your line is in a classified area.

What warranty do you provide?

24 months on parts and workmanship for balances, weighing modules and checkweighers, with technical support for the service life of the instrument.

Can I request a custom capacity, belt width or OEM variant?

Yes. Capacity, division and belt width on the CW checkweigher are fixed at order, and OEM variants of the weighing modules are available. Send your requirements through the quote form.

How do I get a quotation?

Use the quote form, email Alvin@definitionscale.com, message Alvin on WhatsApp / WeChat at (+86)-139-237-412-90, or call the same number. Include the model, capacity, readability, quantity, destination and your area classification.

Need a certified weighing solution for a hazardous area?

Tell us your zone classification, capacity, readability and quantity. Our engineering team will reply with a configuration and a quotation.

EMAIL US WhatsApp WeChat