Technical guide · Updated 2026-11-11

Ex db IIB T6 Gb Explained: Reading an Explosion-Proof Marking

A plain-English breakdown of every element of the Ex db IIB T6 Gb marking used on flameproof weighing equipment for Zone 1 and Zone 2.

Key facts

This guide applies to Definition Electric Ex balance, weighing module and checkweigher installations. Certificate numbers, protection markings, IP ratings and interface details are stated explicitly so they can be verified against the delivered nameplate.

Ex - explosion-protected equipment

The Ex symbol identifies equipment designed for use in explosive atmospheres. On our balances the symbol appears on the front panel and on the rating plate.

db - flameproof enclosure

The "db" protection concept places the electrical circuits inside an enclosure that can withstand an internal explosion without transmitting the flame to the outside atmosphere. It is defined in IEC 60079-1. Because the containment is built into the enclosure, no purge, pressurisation or barrier is needed.

IIB - gas group

Group II covers industrial atmospheres other than mines. IIB covers gases such as ethylene; it sits between IIA and IIC in ignition energy. Check that the gas group in your area classification is covered by the equipment marking.

T6 - temperature class

T6 means the maximum surface temperature of the equipment will not exceed 85 C. This is the most conservative of the common T classes (T1 450 C through T6 85 C).

Gb - equipment protection level

Gb denotes a high level of protection suitable for Zone 1 and Zone 2. It is not a dust marking; dust-hazard applications require their own assessment.

Certificate and standards

Definition Electric EX-GB balances carry certificate ZJEx23.1422 and the EX-MQ module carries SHExC22.2400, with enclosures designed to IEC 60079-0 and IEC 60079-1. Always verify the marking on the delivered nameplate against the certificate before installation.

Questions engineers ask

Is Ex db IIB T6 Gb the same as ATEX certification?

No. Ex db IIB T6 Gb is a protection marking; ATEX is a European regulatory certification scheme. Our instruments carry Chinese Ex certificates and are not ATEX or IECEx certified.

Can an Ex db IIB instrument be used in an IIC area?

Group IIC has a lower minimum ignition energy than IIB. Equipment marked IIB is not automatically suitable for an IIC atmosphere - check your area classification and the certificate.

Specifications are typical and subject to change. Always verify the approval marking and certificate against your hazardous-area classification before installation.

Need a certified weighing solution for a hazardous area?

Tell us your zone classification, capacity, readability and quantity. Our engineering team will reply with a configuration and a quotation.

EMAIL US WhatsApp WeChat