Technical guide · Updated 2026-11-11

How to Choose an Explosion-Proof Balance for Zone 1 and Zone 2

A practical specification checklist: area classification, Ex marking, capacity and readability, ingress protection, materials, data output and certification evidence.

Key facts

This guide applies to Definition Electric Ex balance, weighing module and checkweigher installations. Certificate numbers, protection markings, IP ratings and interface details are stated explicitly so they can be verified against the delivered nameplate.

Start with the area classification

Before looking at capacity or price, confirm the zone, gas group and temperature class of the installation area. An instrument marked Ex db IIB T6 Gb is a flameproof device (db) for gas group IIB with a maximum surface temperature of 85 C (T6) and equipment protection level Gb, suitable for Zone 1 and Zone 2. The marking on the instrument nameplate and the certificate number must be checked against your own hazardous-area classification dossier.

Match readability to the actual tolerance

A 0.0001 g (0.1 mg) analytical balance is the right choice for API dispensing and sample preparation, but it is unnecessarily slow and fragile for weighing 25 kg drums. As a rule, choose the smallest capacity that covers your maximum load and a readability at least ten times finer than the tolerance you must hold. Definition Electric offers 0.0001 g, 0.001 g, 0.01 g, 0.1 g, 0.5 g and 1 g classes within the Ex range.

Ingress protection is not the same as explosion protection

IP ratings describe protection against solids and water; Ex markings describe protection against ignition. They are independent. The EX-GB-H uses an IP65 flameproof enclosure, while the EX-GB-T uses an IP68 SUS304 enclosure for washdown areas. A balance can be IP68 without being safe in a Zone 1 area - always verify both.

Materials and cleaning

Brushed SUS304 stainless steel resists water, acids, alkalis and aggressive chemical vapours and wipes clean in seconds. For battery, marine or especially corrosive environments, ask about SUS316 options on OEM weigh modules.

Data output and traceability

If weights need to reach a batch record, printer, PLC or MES, confirm the interface before ordering. Our Ex balances provide RS-232 ASCII output at 1,200-9,600 bps; RS-485 and Modbus RTU are available on weighing modules and checkweighers.

Certification evidence and local approval

Ask for the certificate number and the nameplate marking. Our Ex balances carry Chinese Ex certificates (ZJEx23.1422 for the EX-GB families, SHExC22.2400 for the EX-MQ module) to GB 3836 / IEC 60079-0 and IEC 60079-1. If your site requires ATEX or IECEx certification specifically, this must be established before purchase - we do not claim those approvals.

Questions engineers ask

What is the most important specification on an explosion-proof balance?

The Ex marking and its certificate, matched to your zone, gas group and temperature class.

Do I need a purge system for an Ex db balance?

No. A flameproof Ex db enclosure is designed to contain an internal ignition, so no purge or pressurisation equipment is required.

Specifications are typical and subject to change. Always verify the approval marking and certificate against your hazardous-area classification before installation.

Need a certified weighing solution for a hazardous area?

Tell us your zone classification, capacity, readability and quantity. Our engineering team will reply with a configuration and a quotation.

EMAIL US WhatsApp WeChat